Amonstar GLUE BINDING MACHINE Manual de usuario descargar pdf (Pagina 5)

Binding Machine Packing list Installation and Precautios

Packing list

1. 1 unit of machine

2. 1 set of soft cover template

3. 1 pcs of cable

4. 1 pcs of cross screw-driver

5. 1 pcs of M5 hexagonal socket spanner

6. 1 operate manual

7. 1 bag of glue

Installation

Please put this machine onto a stable worktop, avoid

approaching any humidity. Certain space should be kept to

operate the machine

Precaution

1. Connect to the specied power supply(220V/50Hz or 110V/60Hz).Open glue box cover, put in the solid glue. Note:

A.The glue should be clean and without any sundries.B Regularly add the glue particles into the glue box according to glue slurry

consumption. Thus a proper amount of glue slurry can be continuously supplied.

2. Turn on the switch, the glue to be heated under 170 degree about 15-20 minutes. During heating, don’t move the glue

box to avoid damage. Pay special attention to avoid the glue box touching hard thing during operating.

3. Make sure the template on the machine is accordant to the cover of binding file.(e.g. soft cover matches soft cover

template and hard cover le matches hard cover template)

4. Put the paddle on “N” position.

5. During the installation, if the gluing roller on the glue box is not parallel to the spine of the binding book, please adjust it

according to “Adjustment of the gluing roller” section in this manual. (page 11)

6. Milling cutter’s position can be adjusted by adjusting four screws. (page12)

1 2 3 4 5 6 7 8 9 10 ... 19 20

Sin comentarios

Amonstar GLUE BINDING MACHINE Manual de usuario Pagina 5